1. Automation/Motion Controls For Sale
  2. sku: 15573001910065853
  3. SIEMENS 3TH80

SIEMENS 3TH80 Contactor Ac 40-0A 6AMP. 110-132V 4X

110-132v Siemens 3th80 40-0a Contactor 6amp. Ac 4x No

( Brand: Siemens ), ( Manufacturer Part Number: 3TH80 ), ( Herstellernummer: 3th80 40-0a ), ( Type: Contactor ), ( Unit Type: Unit )

Review SIEMENS 40-0a Contactor 6amp. Ac 4x No

The **Siemens 3TH80 40-0A Contactor (6A, 110 132V AC, 4-Pole)** is a high-performance, compact electrical switching device designed for reliable and efficient control of AC power circuits in industrial, commercial, and residential applications. Part of Siemens trusted 3TH series, this contactor is engineered with precision to deliver robust operation in demanding environments where consistent performance and durability are essential. With a rated current of **6 amperes** and a voltage range of **110 132V AC**, it is well-suited for low-voltage control systems, including motor starters, heating elements, lighting circuits, and other electrical loads requiring precise on/off switching. The **4-pole configuration** ensures balanced phase control, minimizing voltage imbalances and reducing stress on connected equipment, making it ideal for three-phase or single-phase applications where symmetrical operation is critical.

Constructed with Siemens signature quality engineering, this contactor features a **compact yet sturdy design**, allowing for easy integration into control panels, junction boxes, or direct mounting on DIN rails. Its **magnetic coil mechanism** provides fast and reliable actuation, ensuring minimal contact bounce and extended operational life, even under frequent cycling conditions. The **silver-plated copper contacts** are designed for low resistance and high current-carrying capacity, reducing heat buildup and preventing premature wear, while the **auxiliary contacts** (if included in the variant) offer additional switching functionality for signaling or interlocking purposes. The contactor s **thermal overload protection** (when paired with compatible relays or overload units) further enhances safety by disconnecting the circuit in case of excessive current, preventing equipment damage.

Safety and compliance are at the forefront of Siemens design philosophy, and the 3TH80 40-0A contactor adheres to stringent international standards, including **IEC/EN 60947-4-1** and **UL 508**, ensuring it meets rigorous testing for electrical safety, insulation coordination, and environmental resistance. Its **IP20 protection rating** makes it suitable for indoor use in clean, dry environments, though additional enclosure measures may be required for exposure to dust, moisture, or corrosive atmospheres. The contactor s **low power consumption** during the hold state (thanks to its latching mechanism) optimizes energy efficiency, while its **long service life** often exceeding **10 million operations** reduces maintenance downtime and replacement costs over time.

Ideal for applications such as **HVAC systems, pump controls, industrial machinery, and lighting automation**, the Siemens 3TH80 40-0A contactor offers a seamless blend of functionality and reliability. Its **modular compatibility** with Siemens broader range of relays, timers, and control components simplifies system integration, allowing engineers to design flexible and scalable control solutions. Whether used in a small-scale automation project or as part of a larger industrial control panel, this contactor delivers **consistent performance, rapid response times, and long-term dependability**, making it a trusted choice for professionals demanding precision and durability in electrical switching applications.

### **Pros and Cons of buying a Siemens 3TH80 40-0A Contactor (6A, 110-132V AC, 4-Pole)**

#### **Pros:**

1. **Reliability and Brand Reputation** Siemens is a well-established manufacturer known for high-quality electrical components, offering durability and consistent performance in industrial and commercial applications.

2. **High Current Rating (40A)** Despite the 6A contact rating, the 40A coil rating allows it to control larger loads when paired with appropriate relays or auxiliary switches, making it versatile for small to medium motor control or circuit switching.

3. **Wide Voltage Range (110-132V AC)** The contactor is compatible with standard North American voltage levels, reducing compatibility issues in typical installations.

4. **Compact and Space-Efficient Design** The 3TH80 series is designed for modular applications, fitting well in panel builds where space is limited.

5. **Low Power Consumption** The coil operates efficiently, consuming minimal power when energized, which is beneficial for energy-sensitive applications.

6. **Arc Resistance** Siemens contactors are engineered to minimize arcing on contacts, extending their lifespan and reducing maintenance needs.

7. **Compatibility with Siemens Systems** If you re already using Siemens components (relays, PLCs, etc.), this contactor integrates seamlessly, simplifying wiring and troubleshooting.

8. **Long Lifespan** With proper maintenance, Siemens contactors can last for decades, making them a cost-effective long-term solution.

9. **Easy Installation** Standard mounting (DIN rail or panel cutout) and clear labeling simplify installation for technicians.

10. **Overload Protection Options** While the contactor itself doesn t include overload protection, it can be paired with Siemens thermal overload relays (e.g., 5SL series) for complete motor protection.

---

#### **Cons:**

1. **Higher Upfront Cost** Compared to generic or no-name contactors, Siemens products are premium-priced, which may be a barrier for budget-conscious buyers.

2. **6A Contact Rating Limitation** The **6A contact rating** means it is **not suitable for high-current applications** (e.g., large motors, heavy-duty relays, or high-power loads). For motors above 1/2 HP (370W at 110V), a higher-rated contactor (e.g., 10A, 15A, or 25A) is required.

3. **Coil Voltage Mismatch Risk** While it works on 110-132V AC, some applications may require **24V, 120V, or 230V coils**, meaning an additional relay or transformer may be needed for compatibility.

4. **Limited Overload Protection** The contactor alone does **not** protect against motor overloads; external thermal relays or circuit breakers are necessary, adding complexity and cost.

5. **Potential for Overkill in Low-Power Applications** If you only need to switch small loads (e.g., LEDs, sensors, or low-power relays), a **cheaper, lower-rated contactor** (e.g., 1A 2A) would suffice.

6. **Sourcing and Availability** While Siemens is widely available, some distributors may carry stockouts, requiring extra lead time compared to generic brands.

7. **Maintenance Requirements** Like all contactors, it requires periodic inspection for **contact wear, coil integrity, and proper lubrication** (if applicable) to prevent failures.

8. **Not Ideal for High-Frequency Switching** If used in **high-cycle applications** (e.g., frequent on/off cycles), the 6A contacts may degrade faster than heavier-duty models.

---

### **Conclusion**

The **Siemens 3TH80 40-0A (6A, 110-132V AC, 4-pole) contactor** is a **reliable, high-quality choice** for **low-to-medium current switching applications** where **durability, brand trust, and modular integration** are priorities. However, its **6A contact rating is a critical limitation** it is **not suitable for motor control, high-power relays, or loads exceeding 6A continuously**.

If your application involves:

- **Small signal relays, sensors, or non-motor loads under 6A**, this contactor is an **excellent investment** due to its longevity and Siemens reliability.

- **Motor control, high-current switching, or industrial automation**, you should **upgrade to a higher-rated contactor** (e.g., 10A, 15A, or 25A) to avoid premature failure.

For **budget-sensitive or low-power applications**, a **generic 6A contactor** (e.g., from Omron, TE Connectivity, or a no-name brand) may offer similar performance at a lower cost.

---

### **Final Recommendation**

**Buy the Siemens 3TH80 40-0A contactor if:**

You need a **durable, modular, and reliable** contactor for **non-motor, low-current switching** (e.g., controlling small relays, indicators, or low-power circuits).

You re already using **Siemens components** and want **seamless integration**.

You prioritize **long-term reliability** over cost and can justify the premium price.

**Avoid it if:**

You need to **control motors, high-power loads, or currents above 6A continuously**.

You re working on a **tight budget** and can find an equally reliable **lower-cost alternative**.

Your application requires **high-frequency switching** (consider a **low-inductance or solid-state relay** instead).

**Alternative Considerations:**

- For **motor control**, use a **higher-rated Siemens contactor** (e.g., **3TH80 10A, 15A, or 25A**) paired with a **thermal overload relay**.

- For **ultra-low-power applications**, a **1A 2A generic contactor** may be sufficient.

- If **cost is the main concern**, compare with **Omron G2R, TE Connectivity, or other Siemens-compatible brands** for similar performance at a lower price.

Would you like help selecting an alternative based on your specific load requirements?

Details:

Response time: within 24 hours. At Autos electrical, we prioritize your safety and satisfaction. Satisfaction Guaranteed. Functional and reliable, with some cosmetic imperfections.

Secure and Convenient. Fast and Secure Delivery. Item may exhibit. Pre-owned, thoroughly tested, and fully functional.

Minor cosmetic wear scratches, scuffs, etc. Accurate , high-quality images, and prompt issue resolution. Signs of handling or installation. Original condition required.

Feature Specification, Manufacturer Siemens, Product Line 3TH80 Control Relay, Poles 4-Pole, Contact Configuration 4 NO Normally Open, Current Rating 6 Amps, Coil voltage 110V 132V AC 50/60 Hz, 600V UL / 690V IEC, Mounting 35mm DIN Rail or Screw Mount, Standard IEC 60947 VDE 0660.

part #: 3th80 prices

  • $17.99-$35.00

specifications automationjack:

  • brand: Siemens
  • mpn: 3th80
  • herstellernummer: 3th80 40-0a
  • type: Contactor
  • unit type: Unit

seller automationjack:

  • rating: 99.7%
  • city: Stone Mountain, Georgia
  • # reviews: 2286

shipping automationjack:

  • transit: 5-12 Days
  • cost: $0.00
  • carrier: UPS
  • type: Fixed
  • service: UPS Ground
  • class: Standard

offer automationjack:

  • best offers: True
  • options: Ship-to-home
  • sold: 0
  • availability: In Stock
  • started: May 15, 2026
  • quantity: 1

general automationjack:

  • condition: Used
  • Business Industrial > Industrial Automation Motion Controls > Other Automation Equipment

returns automationjack:

  • method: Money back
  • paid by: Buyer
  • time: 30 Days
  • policy: Returns Accepted

payments automationjack:

  • other
  • credit card: Discover
  • wallet: Google-pay
herstellernummer: 3th80 40-0a, type: contactor, unit type: unit,
category: business & industrial > industrial automation motion controls > automation equipment, sku: 15573001910065853,
Siemens 3TH80 Is Similar To:
automationjack logo
5 offers $17.99–$35.00 USD
  • Used. Offer #1 priced at $17.99 + $0.00 shipping estimate = $17.99* total. Item may exhibit. Secure and Convenient.FREE SHIPPING
  • New – Open box. Offer #2 priced at $18.74 + $9.66 shipping estimate = $28.40* total. Item location - 45B.+$9.66 shipping
  • Used. Offer #3 priced at $35.00 + $14.00 shipping estimate = $49.00* total. +$14.00 shipping
  • New – Open box. Offer #4 priced at $18.82 + $9.35 shipping estimate = $28.17* total. Item location - Storage unit.+$9.35 shipping
  • Used. Offer #5 priced at $8.99 + $0.00 shipping estimate = $8.99* total. Message if any questions.FREE SHIPPING

Copyright © automationjack.com