MATSUSHITA PC-5P Magnetic Contactor Relay

( Brand: Matsushita ), ( Manufacturer Part Number: PC-5P ), ( Part Type: Contactor )

Review MATSUSHITA Used And Tested Magnetic Contactor Relay

The **Matsushita PC-5P Magnetic Contactor Relay** is a high-performance, compact yet robust electromagnetic relay designed for demanding industrial, commercial, and automotive applications where reliability, efficiency, and precision control are paramount. Part of Matsushita s trusted line of electrical components, this 5-pole (5P) contactor is engineered to deliver exceptional switching performance with minimal contact wear, making it ideal for frequent on/off cycling in high-current circuits. Its magnetic coil operates on a robust electromagnetic principle, ensuring rapid and consistent actuation even under fluctuating voltage conditions, which is critical in environments where power stability cannot be guaranteed. The relay features a **normally open (NO) contact configuration** across all five poles, allowing for versatile wiring schemes to accommodate a wide range of control logic from simple motor starting sequences to complex relay ladder control systems. Constructed with high-quality materials, including a durable coil winding and precision-machined armature, the PC-5P is built to withstand prolonged use without degradation, reducing maintenance downtime and extending the lifespan of connected equipment.

One of the standout features of this contactor is its **compact yet sturdy design**, which allows for efficient space utilization in control panels, enclosures, or automotive wiring harnesses without compromising performance. The relay s **low contact resistance** and **high contact capacity** (typically rated for currents up to 10A per pole, depending on the specific model variant) ensure reliable current conduction while minimizing heat generation, a key factor in preventing premature failure in high-load applications. Additionally, the PC-5P incorporates **self-extinguishing insulation materials**, enhancing safety by reducing the risk of fire hazards in the event of arcing or overheating. Its **mechanical durability** is further reinforced by a robust spring mechanism, which guarantees consistent and repeatable operation cycle after cycle, even under vibration or mechanical stress making it particularly suited for automotive, HVAC, or industrial automation systems where environmental factors can be harsh.

For applications requiring **remote or automated control**, the Matsushita PC-5P integrates seamlessly with PLCs (Programmable Logic Controllers), solid-state relays, or other control systems via its standard coil voltage ratings (commonly 12V DC, 24V DC, or 110V AC, though exact specifications should be verified against the datasheet). The relay s **fast switching speed** and **low power consumption** during the off-state make it energy-efficient, reducing operational costs in long-term deployments. Furthermore, its **modular design** allows for easy integration into existing systems, whether retrofitting older machinery or designing new control architectures. Whether used in **motor starters, solenoid control, lighting systems, or protective relay circuits**, the PC-5P delivers a balance of **precision, durability, and adaptability**, ensuring dependable operation in both standard and challenging electrical environments. With its reputation for reliability and Matsushita s commitment to quality engineering, this contactor remains a trusted choice for engineers and technicians seeking a dependable switching solution.

**Pros and Cons of buying a Matsushita PC-5P Magnetic Contact Relay**

The Matsushita PC-5P is a widely used magnetic contactor relay, particularly in industrial and automation applications. Below is a detailed breakdown of its advantages and disadvantages.

### **Pros**

1. **Reliability and Durability**

The Matsushita PC-5P is known for its robust construction, designed to handle frequent switching cycles without excessive wear. It is built to withstand harsh environmental conditions, making it suitable for industrial settings where reliability is critical.

2. **High Current and Voltage Ratings**

This relay supports high current loads (up to 10A at 250V AC or 10A at 125V DC, depending on the coil voltage), making it suitable for controlling motors, heaters, and other high-power devices. The contact ratings ensure it can handle the demands of many industrial applications.

3. **Wide Coil Voltage Range**

The PC-5P is available in multiple coil voltage options (e.g., 12V DC, 24V DC, 110V AC, 220V AC), allowing flexibility in control circuit integration. This versatility makes it adaptable to different power supply configurations.

4. **Compact and Space-Efficient Design**

Compared to some larger industrial contactors, the PC-5P is relatively compact, which can be advantageous in applications where space is limited. Its small footprint does not compromise performance.

5. **Low Operating Power Consumption**

The coil consumes minimal power when energized, which can be beneficial in energy-sensitive applications or where power efficiency is a concern.

6. **Long Lifespan**

Matsushita (now Panasonic) is a reputable manufacturer with a history of producing long-lasting electrical components. The PC-5P is designed for extended operational life, reducing the need for frequent replacements.

7. **Easy Installation and Maintenance**

The relay is straightforward to install, with standard mounting options (e.g., DIN rail or panel mounting). Maintenance is minimal, typically requiring only periodic inspection of contacts for wear or arcing.

8. **Compatibility with PLCs and Control Systems**

The PC-5P is often used in conjunction with programmable logic controllers (PLCs) and other automation systems due to its standardized electrical characteristics. It integrates seamlessly with relays, timers, and other control devices.

9. **Cost-Effective for High-Volume Applications**

While the upfront cost may be moderate, its reliability and longevity make it cost-effective in applications where downtime is expensive. Bulk purchases can further reduce per-unit costs.

10. **Global Availability and Spare Parts Support**

Matsushita (Panasonic) components are widely available through distributors worldwide, ensuring easy access to replacements or spare parts. This is particularly useful for maintenance or upgrades in remote or large-scale operations.

---

### **Cons**

1. **Limited Current Capacity for Some Applications**

While the PC-5P handles up to 10A, it may not be sufficient for very high-power applications (e.g., large motors, heavy-duty machinery, or three-phase loads). In such cases, a larger contactor (e.g., 16A, 25A, or higher) would be required.

2. **Contact Arcing at High Currents**

Like most mechanical relays, the PC-5P can experience contact arcing when switching inductive loads (e.g., motors). This can lead to gradual contact erosion over time, reducing the relay s lifespan if not properly snubbed with a flyback diode or RC snubber circuit.

3. **No Built-In Overload Protection**

The PC-5P is a contactor, not a motor starter, and lacks built-in overload protection features such as thermal overload relays. In motor control applications, additional overload protection devices must be added separately to prevent damage from sustained overloads.

4. **Sensitivity to Environmental Conditions**

While the PC-5P is designed for industrial use, extreme environments (e.g., high humidity, dust, or corrosive atmospheres) may require additional protection, such as enclosures or sealing. Prolonged exposure to such conditions can reduce reliability.

5. **Mechanical Wear Over Time**

Repeated switching can lead to mechanical wear in the relay s contacts and moving parts. While Matsushita s quality mitigates this, it is not entirely eliminated, and eventual replacement may be necessary.

6. **Limited Customization Options**

The PC-5P is a standard relay with fixed specifications. Users cannot customize parameters such as contact arrangement, coil voltage, or mounting style without selecting a different model. This lack of flexibility may be a drawback for specialized applications.

7. **Potential for False Triggering**

In noisy electrical environments, electromagnetic interference (EMI) or voltage spikes can occasionally cause false triggering of the relay. While rare, this can lead to unintended operation of controlled devices.

8. **Replacement Parts May Become Obsolete**

As technology evolves, some older relay models may become harder to source over time. While the PC-5P is still widely available, future-proofing may require investing in newer, more modern contactors with longer support lifecycles.

9. **Higher Initial Cost Compared to Basic Relays**

While not excessively expensive, the PC-5P is priced higher than very basic relays or solid-state relays. For low-power or non-industrial applications, a cheaper alternative might suffice.

10. **No Built-In Diagnostics**

Unlike some advanced contactors or motor starters, the PC-5P lacks built-in diagnostic features to alert operators to potential failures (e.g., contact wear, coil failure). Reliance on manual inspection is required.

---

### **Conclusion**

The Matsushita PC-5P magnetic contactor relay is a well-regarded, reliable, and versatile component ideal for a wide range of industrial and automation applications. Its strengths lie in its durability, high current handling, compact design, and compatibility with control systems. It is particularly suitable for applications where frequent switching, moderate power control, and long-term reliability are priorities.

However, it is not without limitations. Its 10A current rating may be insufficient for high-power applications, and it lacks built-in overload protection or diagnostics. Environmental factors and contact arcing can also affect its longevity if not properly managed. For applications requiring higher currents, overload protection, or advanced diagnostics, alternative contactors or solid-state relays may be more appropriate.

---

### **Recommendation**

- You need a reliable, mid-range contactor for controlling motors, heaters, or other loads up to 10A.

- Your application involves frequent switching cycles in an industrial or automated environment.

- You require a compact, widely available relay with multiple coil voltage options.

- Cost-effectiveness and longevity are important, and you can supplement it with additional protection (e.g., overload relays, snubber circuits).

- Your load exceeds 10A, in which case a higher-rated contactor (e.g., 16A, 25A) or a motor starter with overload protection is needed.

- You require built-in diagnostics or advanced protection features, which may be available in newer or specialized contactors.

- Your environment is extremely harsh (e.g., high dust, moisture, or corrosive conditions), and you need a more rugged or sealed relay.

- You are working with very low-power applications where a basic or solid-state relay would suffice and be more cost-effective.

For most standard industrial applications where reliability and moderate power handling are required, the Matsushita PC-5P remains a solid choice. Pairing it with appropriate protective measures (e.g., flyback diodes, overload relays) will further extend its service life and ensure safe operation.

Details:

part #: pc5p prices

• $116.05-$172.00

specifications automationjack:

• brand: Matsushita
• mpn: Pc-5p
• part type: Contactor

offer automationjack:

• options: Ship-to-home
• started: March 10, 2026
• quantity: 2
• availability: In Stock
• best offers: True
• sold: 0

payments automationjack:

• credit card: Diners-club
• wallet: Apple-pay
• other

shipping automationjack:

• transit: 6-9 Days
• type: Fixed
• cost: $0.00
• class: Standard
• service: USPS Ground Advantage
• carrier: USPS

seller automationjack:

• city: Hebron, Kentucky
• # reviews: 369
• rating: 98.4%

general automationjack:

• Business Industrial > Industrial Automation Motion Controls > Other Automation Equipment
• condition: Used

returns automationjack:

• time: 14 Days
• policy: Returns Accepted
• method: Money back
• paid by: Buyer

Matsushita PC-5P Is Similar To:

• Panasonic Zuep5506 Matsushita Electric Used Tested Cleaned (47.9% similar) Matsushita electric ZUEP5506 / used tested cleaned discontinued by manufacturer, circuit board, 2 red LED/1 green led, CE33 400V. All products are guaranteed to be working but may show signs of use. Packaging and handling: items are safely eds packaged in custom shipping cartons for protection. Call...(August 14th, 2024)
• Matsushita Anm100 Nais Mico-imagechecker M100 Controller Used With Warranty (36.4% similar) Discover the Matsushita Nazis ANM100 micro-image checker M100 controller, a reliable solution for your automation needs. Location: TUFF-243 WIT/2. Same day shipping options search Mr machine. You are buying one micro-image checker controller. Ideal for enhancing industrial automation, the ANM100 is ...(December 4th, 2024)
• Matsushita Electric Bmft6104-1z Bmft61041z Used (34% similar) Call to use a shipping service other than the ones listed. All products are guaranteed to be working but may show signs of use if purchasing a used product. Sells new and surplus product develops channels to purchase such. Packaging and handling: items are safely eds packaged in custom shipping ...(January 2nd, 2025)
• Panasonic Zuep-50451 Matsushita Electric Zuep50451 Used (31.6% similar) Matsushita electric ZUEP-50451 / ZUEP50451 used discontinued by manufacturer, pc board, zip series, 1 x 30 pin male connector, 20 connector. Packaging and handling: items are safely eds packaged in custom shipping cartons for protection. Call to use a shipping service other than the ones listed. ...(July 19th, 2025)
• Panasonic Zuep-50730d Matsushita Electric Zuep50730d Used (31% similar) Matsushita electric ZUEP-50730D / ZUEP50730D used discontinued by manufacturer, pc board, RBT-0490C, zip series. Packaging and handling: items are safely eds packaged in custom shipping cartons for protection. All products are guaranteed to be working but may show signs of use if purchasing a used ...(July 20th, 2025)
• Panasonic Zuep-50500 Matsushita Electric Zuep50500 Used (31.6% similar) All products are guaranteed to be working but may show signs of use if purchasing a used product. Packaging and handling: items are safely eds packaged in custom shipping cartons for protection. Sells new and surplus product develops channels to purchase such. Call to use a shipping service other ...(July 20th, 2025)
• Panasonic Zuep-51380 Matsushita Electric Zuep51380 Used (31.6% similar) Sells new and surplus product develops channels to purchase such. Packaging and handling: items are safely eds packaged in custom shipping cartons for protection. All products are guaranteed to be working but may show signs of use if purchasing a used product. Call to use a shipping service other ...(July 20th, 2025)
• Panasonic Zuep-50510 Matsushita Electric Zuep50510 Used (31.6% similar) Packaging and handling: items are safely eds packaged in custom shipping cartons for protection. All products are guaranteed to be working but may show signs of use if purchasing a used product. Call to use a shipping service other than the ones listed. Sells new and surplus product develops ...(July 20th, 2025)
• Matsushita Electric Apl4715 Expander Unit 24vdc Used (33% similar) For example, programmable logic controllers plc's, distributed control systems DC's's, human machine interface him's, variable speed drives BSD's, power supplies, pressure transmitters and everything in between. Is Matsushita electric APL4715 not the part you are wanting. APL4715 Matsushita electric...(July 22nd, 2025)
• Panasonic Zuep54100 Matsushita Electric Used (33% similar) The product is a used Panasonic industrial automation equipment, specifically Matsushita electric ZUEP54100. This model is known for its advanced technology and reliability in controlling industrial automation systems. With the trusted brand of Panasonic and specific model number ZUEP541 this ...(November 1st, 2025)
• Panasonic Fpg-xy64d2t-a Matsushita Electric Fpgxy64d2ta Used (30.3% similar) Packaging and handling: items are safely eds packaged in custom shipping cartons for protection. All products are guaranteed to be working but may show signs of use if purchasing a used product. Sells new and surplus product develops channels to purchase such. Call to use a shipping service other ...(February 9th, 2026)