THOMSON INDUSTRIES 64-316892-C042 Danaher Motion

( Brand: Thomson Industries ), ( Manufacturer Part Number: 64-316892-C042 )

Review THOMSON INDUSTRIES Danaher Motion 64316892c042 Used

The **Thomson 64-316892-C042** is a high-performance, precision-engineered linear actuator from Danaher Motion s Thomson brand, designed for demanding industrial, automation, and motion control applications where reliability, efficiency, and compact form factor are critical. This ball screw-driven linear stage combines robust construction with advanced mechanical and electronic features to deliver smooth, repeatable motion with minimal backlash, making it ideal for applications such as CNC machining, semiconductor manufacturing, medical equipment, robotics, and automated assembly lines. The actuator features a **42mm diameter ball screw** with a **lead of 16mm**, providing a balanced trade-off between speed and load capacity, allowing for precise positioning while maintaining high throughput. Its **closed-loop design** ensures accurate feedback control, reducing errors and enhancing system stability, particularly in high-precision environments where even micrometer-level deviations can impact performance. The housing is constructed from **high-strength aluminum alloy**, offering a lightweight yet rigid structure that minimizes vibration and thermal expansion, while the preloaded ball nut system eliminates play, ensuring consistent motion and extended service life. Equipped with **Thomson s proprietary ball screw lubrication system**, the actuator maintains optimal performance under heavy loads and continuous operation, reducing maintenance requirements and wear over time. For enhanced integration, the 64-316892-C042 is compatible with a range of **Danaher Motion controllers**, including the **Triton, ServoDrive, and MotionWorks** platforms, enabling seamless communication via industry-standard interfaces such as **Ethernet/IP, Profibus, or DeviceNet**. Additionally, its **modular mounting options** including base, flange, or linear guide configurations allow for flexible installation in tight spaces or complex setups. Whether deployed in a high-speed pick-and-place system, a precision metrology application, or a dynamic robotics arm, this linear actuator delivers the durability and accuracy needed to meet the most exacting industrial demands.

### **Pros and Cons of buying a Thomson 64-316892-C042 (Danaher Motion 64316892C042) Linear Actuator**

#### **Overview**

The **Thomson 64-316892-C042** (also listed as **Danaher Motion 64316892C042**) is a **ball screw linear actuator** designed for precision motion control in industrial, medical, and automation applications. It features a **6mm lead ball screw, 42mm diameter, and a 100mm stroke** (standard configuration), making it suitable for compact yet high-precision motion systems.

---

### **Pros**

1. **High Precision and Repeatability**

- Ball screw actuators are known for their **low friction and high accuracy**, making them ideal for applications requiring **sub-micron positioning** (e.g., CNC machines, medical devices, robotics).

- The **preloaded ball nut** reduces backlash, ensuring consistent performance over long strokes.

2. **Compact and Lightweight Design**

- The **42mm diameter** and **6mm lead** make it suitable for **space-constrained applications** where larger linear stages would be impractical.

- Lower mass improves **dynamic response** and reduces inertia in high-speed or rapid-acceleration systems.

3. **High Load Capacity**

- Despite its small size, it can handle **moderate axial loads** (typically **up to 500-1000 N**, depending on mounting and preload).

- Suitable for **light-duty to medium-duty applications** (e.g., laboratory equipment, pick-and-place systems).

4. **Compatibility with Thomson/Danaher Ecosystem**

- Part of **Danaher Motion s (formerly Thomson) linear motion product line**, meaning it integrates well with their **drives, controllers, and accessories** (e.g., **T-LVR, T-LVR drives, or T-LVR-Servo controllers**).

- Supports **open-loop and closed-loop control** via encoders (if retrofitted).

5. **Modular and Customizable**

- Can be **extended or shortened** by adding/removing lead screws.

- Available in **different stroke lengths** (e.g., 50mm, 100mm, 200mm) and **lead variations** (e.g., 2mm, 4mm, 8mm) for different speed/precision trade-offs.

- Optional **end-of-stroke sensors, brakes, or mounting brackets** enhance functionality.

6. **Low Maintenance**

- **Ball screw mechanisms** require **minimal lubrication** (typically grease at installation and periodic checks).

- No wear from **recirculating balls**, reducing long-term maintenance compared to lead screws or belt drives.

7. **Cost-Effective for Precision Needs**

- More affordable than **high-end servo linear stages** (e.g., PI, Physik Instrumente) while still offering **good accuracy**.

- A **good balance between performance and price** for **mid-range applications**.

8. **Wide Industry Adoption**

- Used in **medical (e.g., surgical robots, microscopes), aerospace (testing rigs), and automation (pick-and-place)**.

- Aftermarket support and **OEM availability** make spare parts and replacements easier to find.

---

### **Cons**

1. **Limited Stroke Length**

- The **standard 100mm stroke** may be **too short for large-scale applications** (e.g., heavy-duty CNC machines, large automation systems).

- For longer strokes, **multiple units or a different actuator type (e.g., belt-driven) may be needed**.

2. **Sensitive to Misalignment and Load Direction**

- **Radial and axial loads** can cause **premature wear** if not properly supported.

- Requires **precise mounting** (e.g., **anti-backlash couplings, proper bearings**) to avoid binding or reduced lifespan.

- **Side loads** (e.g., from misalignment) can **damage the ball nut or screw**.

3. **Not Ideal for High-Speed Continuous Operation**

- While capable of **rapid acceleration**, **ball screws are not as efficient as belt drives** for **high-speed continuous motion** (e.g., 3 m/s).

- **Resonance issues** may occur at high speeds, requiring **tuning of control parameters**.

4. **Higher Cost Than Simple Lead Screws**

- More expensive than **basic lead screw actuators** (e.g., from **Thorlabs, Newport**) due to **precision manufacturing**.

- **Servo-controlled versions** (with encoders) increase cost further.

5. **Limited Temperature Range**

- Most standard models operate effectively in **0 C to 50 C**.

- **Extreme temperatures** (e.g., -40 C to 100 C) may require **special lubricants or materials**, adding cost.

6. **Potential for Wear Over Time**

- **Lubrication is neglected**.

- **Side loads or misalignment** occur.

- **Contaminants (dust, debris)** enter the mechanism.

- **Lifespan depends on usage conditions** (industrial vs. lab environments).

7. **Requires Proper Control System**

- For **closed-loop operation**, an **encoder (e.g., absolute or incremental)** must be added, increasing complexity.

- **Open-loop control** (without feedback) may lead to **drift over time** due to backlash or wear.

8. **Limited Availability of Spare Parts**

- While **Danaher Motion has a strong support network**, **older or discontinued models** may have **limited spare parts**.

- **Third-party compatibility** (e.g., for ball nuts or screws) is possible but may require **custom machining**.

---

### **Comparison with Alternatives**

**Feature** **Thomson 64-316892-C042** **Lead Screw Actuator** **Belt-Driven Stage** **Servo Linear Stage (e.g., PI)**

--------------------------- ---------------------------- ------------------------- ----------------------- ----------------------------------

**Precision** High (sub-micron) Medium Medium-High Very High

**Speed** Moderate-High Low-Moderate High High

**Load Capacity** Moderate (500-1000 N) Low-Moderate Low-Moderate High

**Stroke Flexibility** Limited (standard 100mm) High (customizable) High Limited (usually short)

**Maintenance** Low Medium Low Low (but expensive)

**Cost** Moderate Low Low-Moderate High

**Best For** Precision automation, lab General-purpose motion High-speed applications Ultra-high precision (e.g., optics)

---

### **Conclusion**

The **Thomson 64-316892-C042** is a **strong choice for applications requiring compact, high-precision linear motion** where **moderate loads and controlled environments** are expected. It excels in **medical devices, laboratory equipment, and automation systems** where **accuracy, repeatability, and low maintenance** are critical.

- **High-speed continuous motion** (where belt drives may be better).

- **Large stroke applications** (where multiple units or different actuators are needed).

- **Harsh or uncontrolled environments** (where lead screws or ruggedized stages may perform better).

If your application demands **ultra-high precision, long strokes, or extreme speeds**, alternatives like **servo linear stages (PI, Newport) or belt-driven systems (e.g., Thorlabs, Zaber)** may be more suitable. Conversely, if **cost and simplicity** are priorities, a **basic lead screw actuator** could suffice.

---

### **Recommendation**

You need **compact, high-precision motion** (e.g., **medical robotics, CNC micro-machining, lab automation**).

Your application involves **moderate loads (under 1000 N)** and **controlled environments**.

You require **integration with Danaher Motion s drive systems** (e.g., T-LVR, T-LVR ).

You can **properly mount and lubricate** the actuator to prevent wear.

You need **long strokes (beyond 200mm)** opt for **multiple units or a belt drive**.

Your application involves **high-speed continuous motion** consider a **belt-driven stage**.

You require **ultra-high precision (sub-micron over long distances)** evaluate **servo linear stages**.

Your budget is tight **lead screw actuators** may offer sufficient performance at a lower cost.

For **most precision

Details:

Sells new and surplus product develops channels to purchase such. All products are guaranteed to be working but may show signs of use if purchasing a used product. Call to use a shipping service other than the ones listed. Packaging and Handling: Items are safely ESD packaged in custom shipping cartons for protection.

part #: 64316892c042 prices

• $69.99-$850.00

specifications automationjack:

• brand: Thomson Industries
• mpn: 64-316892-c042

shipping automationjack:

• cost: $12.90
• class: Standard
• transit: 30-35 Days
• service: Standard
• type: Fixed

general automationjack:

• Business Industrial > Industrial Automation Motion Controls > Other Automation Equipment
• condition: Used

seller automationjack:

• rating: 99.6%
• # reviews: 194271
• city: 1 Millennium Dr, Willingboro, NJ 08046

payments automationjack:

• wallet: Google-pay
• credit card: Diners-club
• other

offer automationjack:

• quantity: 1
• started: March 13, 2026
• availability: In Stock
• sold: 0
• options: Ship-to-home

returns automationjack:

• policy: Returns Accepted
• time: 30 Days
• paid by: Buyer
• method: Money back

Thomson Industries 64-316892-C042 Is Similar To:

• Moog Sm23165d 2x Thomson Industries Ms33-100219 Linear Guide Xy Stage And Motor (43.5% similar) Rail length : 10.5 long x 2.359 wide; stage 2.36 square. 2 Thomson Industries MS33-100219 linear guide micro stage Moog SM23165D motor: this lot is for one two Thomson Industries stages with Moog animators smart motor Norma 23 motors. Shipping buyer pays for all shipping costs. Power cords and ...(October 2nd, 2024)
• Thomson Industries 27-119310-f767 Danaher Motion 27119310f767 Used (72.1% similar) All products are guaranteed to be working but may show signs of use if purchasing a used product. Packaging and handling: items are safely eds packaged in custom shipping cartons for protection. Sells new and surplus product develops channels to purchase such. Call to use a shipping service other ...(April 27th, 2026)