SEIKI 193-230395-A-01 Circuit Board 16-03-02-00 T186597

( Brand: Seiki ), ( Manufacturer Part Number: 193-230395-A-01 ), ( Part Type: Circuit Board )

Review SEIKI 16-03-02-00 Circuit Board 193-230395

The **Seiki 193-230395-A-01 (16-03-02-00) Circuit Board (T186597)** is a precision-engineered electronic component designed specifically for Seiki brand appliances, particularly models within the **193 series**, such as certain models of air conditioners, heat pumps, or refrigeration units. This circuit board serves as the central nervous system for the appliance s control functions, integrating critical components to manage power distribution, user interface interactions, and operational diagnostics. Manufactured to strict quality standards, the board features a **high-density printed circuit layout** with meticulously placed surface-mount and through-hole components, ensuring reliable performance under varying environmental conditions.

At its core, the **193-230395-A-01** incorporates a **microcontroller or programmable logic controller (PLC)** likely an advanced 8-bit or 16-bit processor paired with essential support circuitry, including **voltage regulators, capacitors, resistors, and transistors**, all optimized for low-power consumption while maintaining robust functionality. The board also integrates **user interface elements**, such as buttons, LEDs, or a small display module, depending on the appliance s complexity, allowing for intuitive control of temperature settings, fan speeds, and operational modes. Additionally, it may include **sensors and feedback loops** to monitor system performance, detect faults, and trigger error codes when anomalies occur, enhancing both user experience and troubleshooting efficiency.

One of the standout features of this circuit board is its **modular and scalable design**, allowing for easy integration with Seiki s broader range of appliances while adhering to strict compatibility protocols. The **16-03-02-00** designation suggests a specific revision or variant tailored for certain model iterations, ensuring backward and forward compatibility with firmware updates or software modifications. Built with **high-grade materials**, including flame-retardant substrates and corrosion-resistant soldering, the board is engineered to withstand prolonged use in demanding environments, such as indoor/outdoor air conditioning units or refrigeration systems exposed to temperature fluctuations.

For technicians and DIY enthusiasts, this circuit board is a critical replacement part when original units fail due to wear, electrical shorts, or component degradation. Its **direct compatibility** with Seiki s 193-series appliances makes it an ideal solution for restoring functionality to units experiencing issues with control malfunctions, erratic behavior, or complete system shutdowns. Whether replacing a damaged board or upgrading an older model, the **193-230395-A-01 (T186597)** ensures seamless operation, providing the reliability and precision expected from Seiki s engineering legacy. Proper installation requires adherence to wiring diagrams and electrical safety protocols to guarantee optimal performance and longevity.

### **Pros and Cons of buying a Seiki 193-230395-A-01 (16-03-02-00) Circuit Board (T186597)**

1. **Compatibility** This circuit board is designed specifically for Seiki models, ensuring proper functionality and integration with the machine s existing components. It is likely a direct replacement for the original part, reducing the risk of mismatches.

2. **Reliability** Seiki is a well-known brand in the commercial laundry and dry cleaning industry, and their parts are generally built to last. A genuine or high-quality aftermarket replacement should maintain the machine s performance and longevity.

3. **Warranty Coverage (if applicable)** If purchasing from an authorized Seiki dealer or a reputable supplier, the part may come with a limited warranty, providing peace of mind against defects or early failure.

4. **Performance Stability** Since this is a circuit board for a specific model (likely a commercial washer or dryer), replacing a faulty board with this part should restore proper operation, including control functions, heating, and timing mechanisms.

5. **Ease of Installation** As a direct replacement, the wiring and connections should align with the machine s existing setup, making installation relatively straightforward for a trained technician.

6. **Cost-Effective Alternative to Replacement** If the machine is otherwise functional but only the circuit board is failing, replacing just this component is cheaper than buying a new machine.

7. **Accessibility of Parts** Seiki parts, including circuit boards, are relatively easy to find through authorized distributors, online marketplaces, or specialized laundry equipment suppliers.

---

1. **Age of the Part** The part number (193-230395-A-01) and model designation (16-03-02-00) suggest it may be an older design. If the machine is outdated, finding compatible labor or additional parts for future repairs could become difficult.

2. **Potential for Counterfeit or Low-Quality Replacements** Purchasing from unverified sellers (e.g., eBay, Amazon, or unlicensed suppliers) risks receiving a counterfeit or poorly manufactured board that fails prematurely or causes further damage.

3. **Labor Costs** Even if the part is affordable, professional installation may require skilled technicians familiar with Seiki machines, increasing the total repair cost.

4. **Compatibility Risks with Modified Machines** If the machine has been previously altered (e.g., upgraded controls, added sensors, or aftermarket modifications), the new circuit board may not fully integrate, leading to partial functionality or errors.

5. **Limited Longevity** Circuit boards, especially in commercial equipment, can degrade over time due to heat, electrical fluctuations, or wear. The new board may fail again if the underlying issues (e.g., power surges, poor maintenance) are not addressed.

6. **Depreciation of the Machine** If the machine is older and the circuit board is a common failure point, the cost of repairs may outweigh the machine s remaining value, making it a candidate for replacement rather than repair.

7. **Learning Curve for DIY Installation** While the part is a direct replacement, wiring and soldering may require technical knowledge. Mistakes could damage the board or the machine, voiding warranties and increasing costs.

---

Buying the **Seiki 193-230395-A-01 (16-03-02-00) circuit board (T186597)** is a practical solution if the machine is otherwise functional and the board is confirmed as the sole issue. It offers a cost-effective way to restore operation while maintaining compatibility. However, the decision depends on factors like the machine s age, the reliability of the seller, and the feasibility of future repairs.

If the machine is **recently purchased, still under warranty, or frequently requires repairs**, replacing it may be more economical in the long run. For older machines with no other major issues, the board replacement is justified.

---

1. **Verify the Diagnosis** Confirm that the circuit board is indeed the faulty component before purchasing. Test other parts (e.g., motor, timer, heating element) to avoid unnecessary expenses.

2. **Purchase from an Authorized Source** Buy the part from **Seiki s official distributor, a reputable laundry equipment supplier, or a trusted online retailer** (e.g., Grainger, PartsTown, or specialized Seiki dealers) to avoid counterfeit or low-quality replacements.

3. **Consider Professional Installation** Unless you have experience with electrical components, hire a **certified Seiki technician** to ensure proper installation and avoid voiding warranties.

4. **Assess the Machine s Lifespan** If the machine is **10 years old** and this is a recurring issue, weigh the cost of repairs against the cost of a new or refurbished unit. Commercial laundry equipment depreciates quickly, and newer models may offer better efficiency and reliability.

5. **Maintain the Machine Post-Repair** After installation, follow **regular maintenance** (cleaning, lubrication, electrical checks) to extend the lifespan of the new board and prevent future failures.

If the machine is **critical to operations, relatively new, and the board is confirmed faulty**, proceed with the purchase and repair. If the machine is **old, frequently breaking down, or no longer cost-effective to maintain**, consider upgrading to a newer model instead. Always prioritize quality over cost to avoid repeated repairs.

Details:

Glad you stopped by. Rush Orders Ship Same Day. Extra Information. SEIKI 193-230395-A-01 16-03-02-00 CIRCUIT BOARD 193-230395 T186597 Brand:: Seiki, condition: This is a used item, in good condition and includes 30 day warranty.

Open to Making Bulk Deals. We proudly sell hard-to-find parts, components, and machines to makers manufacturers.

part #: 193230395a01 prices

• $99.99-$599.99

specifications automationjack:

• brand: Seiki
• mpn: 193-230395-a-01
• part type: Circuit Board

returns automationjack:

• method: Money back
• paid by: Seller
• time: 30 Days
• policy: Returns Accepted

general automationjack:

• condition: Used
• Business Industrial > Industrial Automation Motion Controls > Other Automation Equipment

offer automationjack:

• best offers: True
• options: Ship-to-home
• quantity: 1
• sold: 0
• started: February 5, 2026
• availability: In Stock

payments automationjack:

• other
• credit card: Diners-club
• wallet: Paypal

seller automationjack:

• city: El Paso, Texas
• # reviews: 20978
• rating: 99.7%

shipping automationjack:

• class: Standard, Expedited, One-day
• type: Calculated
• carrier: UPS
• cost: $10.41
• transit: 4-8 Days
• service: UPS Ground, UPS 2nd Day Air, UPS Next Day Air

Seiki 193-230395-A-01 Is Similar To:

• Seiki Ino-4b Ino-14 10-10-01 With Smcn-2b Circuit Board 07-02-03 (50.8% similar) Contact and support. Item location: A-236.: Seiki INO-14 10-10-01 w/ SMCN-2B circuit board 07-02-03. Cut-off time is 4:00 pm ET. Instant transfer from your bank account if eligible...(October 5th, 2024)
• Seiki Opio-l6 20-05-50-00 Operator Interface Board T211078 (46.8% similar) Seiki OPIO-L6 20-05-50-00 operator interface board T211078 warranty information: this is a used item, in good condition and includes 30 day warranty...(December 8th, 2024)
• Hitachi Seiki Ec8703b-1-ka B512 Ec8703b1ka Aks105k Chiller Board (36.4% similar) This specific model, AKS105K, is a single unit board used in chillers for cooling applications. The Hitachi EC8703B-1-KA / EC8703B1KA AKS105K chiller board is an industrial automation equipment designed by Seiki. With the trusted Hitachi brand behind it, this chiller board is a reliable choice for ...(May 29th, 2025)
• Hitachi Seiki Ne-8102-01 Circuit Board Cnc (50% similar) Condition: used, good condition. I will return all messages as soon possible. Standard shipping is free...(September 21st, 2025)
• Seiki Opsw-l6 20-07-00-00 Circuit Board Module T211060 (60% similar) Glad you stopped by. We proudly sell hard-to-find parts, components, and machines to makers manufacturers...(April 11th, 2026)